Variations in heavy metal contamination of stream water and groundwater affected by an abandoned lead–zinc mine in Korea

This study evaluated variations in heavy metal contamination of stream waters and groundwaters affected by an abandoned lead–zinc mine, where a rockfill dam for water storage will be built 11 km downstream. For these purposes, a total of 10 rounds of stream and groundwater samplings and subsequent chemical analyses were performed during 2002–2003. Results of an exploratory investigation of stream waters in 2000 indicated substantial contamination with heavy metals including zinc (Zn), iron (Fe) and arsenic (As) for at least 6 km downstream from the mine. Stream waters near the mine showed metal contamination as high as arsenic (As) 8,923 μg L⁻¹, copper (Cu) 616 μg L⁻¹, cadmium (Cd) 223 μg L⁻¹ and lead (Pb) 10,590 μg L⁻¹, which greatly exceeded the Korean stream water guidelines. Remediation focused on the mine tailing piles largely improved the stream water qualities. However, there have still been quality problems for the waters containing relatively high concentrations of As (6–174 μg L⁻¹), Cd (1–46 μg L⁻¹) and Pb (2–26 μg L⁻¹). Rainfall infiltration into the mine tailing piles resulted in an increase of heavy metals in the stream waters due to direct discharge of waste effluent, while dilution of the contaminated stream waters improved the water quality due to mixing with metal free rain waters. Levels of As, Cu and chromium (Cr) largely decreased after heavy rain but that of Pb was rather elevated. The stream waters were characterized by high concentrations of calcium (Ca) and sulfate (SO₄), which were derived from dissolution and leaching of carbonate and sulfide minerals. It was observed that the proportions of Ca and SO₄ increased while those of bicarbonate (HCO₃) and sodium and potassium (Na+K) decreased after a light rainfall event. Most interestingly, the reverse was generally detected for the groundwaters. The zinc, being the metal mined, was the most dominant heavy metal in the groundwaters (1758–10,550 μg L⁻¹) near the mine, which far exceeded the Korean standard of 1000 μg L⁻¹ for drinking water. The decreases in the heavy metals contents in the groundwaters associated with reduced rainfall were quite different from the increases observed for the stream waters, which is not clearly understood at this time and warrants further investigation.     

Assessment of Groundwater Quality and Contamination from Uranium-Bearing Black Shale in Goesan–Boeun Areas, Korea

This study was initiated to identify the impact of metals and uranium enriched soil and black shale in groundwater quality and contamination. From a Piper diagram, groundwater was classified into four types as (Ca+Mg)–HCO₃ type, (Ca+Mg)–SO₄ type, the mixed type of these two and Na–HCO₃ type, reflecting the complicated nature of geology of the study area. Silicate weathering appeared to be the major water–rock interaction. In groundwater, metals including Cr, Pb, Cu and V, previously identified as being enriched in soils and black shale, were much lower in concentrations than Korean and US EPA drinking water guidelines. Instead, Fe and Mn caused major water-quality problems. In the artesian groundwater from an abandoned uranium mine, the uranium concentration was 21.3 µg L^–1, slightly higher than EPA guidelines of 20 µg L^–1. Heavy metals in groundwater appeared to be controlled mostly by sorptions on to Fe- and Mn-oxyhydroxides. They could be remobilised in groundwater with changes of pH and Eh conditions due to acid mine drainage from black shale or the recharge of fresh water. Uranium would be associated with carbonate and sulphate complexes in groundwater. Because of the remaining water-quality problems in the study area, we suggested containment of identified mine wastes, considering remedial measures for local problems with Fe and Mn, continuous monitoring of groundwater and developing groundwater from deep aquifers.     

The mixing and segregation characteristics of rice straw in a cylindrical bubbling fluidized bed

In the present study, an experiment was performed to investigate the mixing and segregation characteristics of standard sand and rice straw particles in a cylindrical bubbling fluidized bed. The mass ratio (rice straw/standard sand = 0.5–1.25 %) of two particles and superficial gas velocity (0.13–0.18 m/s) were changed as experimental variables. The pressure drop curve and Kramer’s equation were used to determine the minimum fluidization velocity and mixing index, respectively. In all cases, the mixing index was the lowest at U/U _mf = 1.15. Based on the point of U/U _mf = 1.15, the segregation region and mixing region were observed. In the segregation region, mass ratio of 0.75 % showed the lowest mixing index. At the U/U _mf = 1.23 which was selected as the starting of fast pyrolysis considering residence time and the previous fast pyrolysis experiment, mass ratio of 1.25 % showed the highest mixing index which was 0.90.     

Transgenic poplar trees expressing yeast cadmium factor 1 exhibit the characteristics necessary for the phytoremediation of mine tailing soil

Genetic engineering of plants for phytoremediation is thought to be possible based on results using model plants expressing genes involved in heavy metal resistance, which improve the plant’s tolerance of heavy metals and accumulation capacity. The next step of progress in this technology requires the genetic engineering of plants that produce large amounts of biomass and the testing of these transgenic plants in contaminated soils. Thus, we transformed a sterile line of poplar Populus alba X P. tremula var. glandulosa with a heavy metal resistance gene, ScYCF1 (yeast cadmium factor 1), which encodes a transporter that sequesters toxic metal(loid)s into the vacuoles of budding yeast, and tested these transgenic plants in soil taken from a closed mine site contaminated with multiple toxic metal(loid)s under greenhouse and field conditions. The YCF1-expressing transgenic poplar plants exhibited enhanced growth, reduced toxicity symptoms, and increased Cd content in the aerial tissue compared to the non-transgenic plants. Furthermore, the plants accumulated increased amounts of Cd, Zn, and Pb in the root, because they could establish an extensive root system in mine tailing soil. These results suggest that the generation of YCF1-expressing transgenic poplar represents the first step towards producing plants for phytoremediation. The YCF1-expressing poplar may be useful for phytostabilization and phytoattenuation, especially in highly contaminated regions, where wild-type plants cannot survive.     

Hybridization of the natural antibiotic, cinnamic acid, with layered double hydroxides (LDH) as green pesticide

Background, aim, and scope  

Heavy application of highly toxic synthetic pesticides has been committed to protect crops against insects and diseases, which have brought about serious environmental problems. Thus, an inevitable and fundamental issue has been how to protect crops without harmful effects on nature. As a fascinating nature-compatible approach, we have attempted to hybridize soil-compatible layered double hydroxides (LDHs) with natural antibiotic substances. Only a few of natural antibiotic substances are available for pest control mainly because of their inherent properties such as easy degradability, high minimum inhibition concentration for practical application, and often extremely low availability, whereas LDHs exhibit unique properties such as anion exchange capacity, acid lability, and high affinity to ubiquitous carbonate ion which make them an excellent inorganic matrix to carry labile biomolecules in soils. This study focuses on the behavior of cinnamate–LDH hybrid in soils and the evaluation of its potentials as a green pesticide.     

Electrostatic charges during liquid leakage

Leakage accidents of pressurized flammable liquids often occur in chemical plants. To investigate electrostatic hazards due to liquid leakage, the amounts of electrostatic charge during the leakage were observed. The electric field of the clouds generated by liquid leakage was also examined. Various types of pipeline have been designed in consideration of potential leakage that might lead to accidents during industrial processes. Leakage pressure in the range of 0.1–0.3 MPa was used. With regard to the materials, water and kerosene were used. The results obtained from the experiments show that electrostatic charges depend on leakage parameters, such as the type of liquid, the gasket material between flanges, and the pipeline pressure. In all tests, the amount of the electrostatic charges of water, 0.12–0.83 μC/kg, was larger than that of kerosene, ?0.04 to 0.16 μC/kg. The maximum value of the electric field, generated from the leakage liquid in this study, 40.9 v/cm, is a safe level. No incendiary electrostatic sparks, such as brush and/or spark discharges, were detected in our tests.     

Gaseous mercury emissions from unsterilized and sterilized soils: The effect of temperature and UV radiation

Mercury (Hg) emissions from the soils taken from two different sites (deciduous and coniferous forests) in the Adirondacks were measured in outdoor and laboratory experiments. Some of the soil samples were irradiated to eliminate biological activity. The result from the outdoor measurements with different soils suggests the Hg emission from the soils is partly limited by fallen leaves covering the soils which helps maintain relatively high soil moisture and limits the amount of heat and solar radiation reaching the soil surface. In laboratory experiments exposure to UV-A (365 nm) had no significant effect on the Hg emissions while the Hg emissions increased dramatically during exposure to UV-B (302 nm) light suggesting UV-B directly reduced soil-associated Hg. Overall these results indicate that for these soils biotic processes have a relatively constant and smaller influence on the Hg emission from the soil than the more variable abiotic processes.     

Mussel watch program for organic contaminants along the Korean coast, 2001–2007

The level and extent of organic contaminants along the Korean coast were estimated through the mussel watch program, established in 2001. Mussels and oysters were collected at 20 sites along the Korean coast in 2001 and at 25 sites from 2002 to 2007. The mussel tissues were analyzed for PCBs, organochlorine presticides, PAHs, BTs, and PCDD/Fs. PCBs, PAHs, BTs, and PCDD/Fs were ubiquitous contaminants along the Korean coast, showing mean detection frequencies of more than 95% over 7 years. The concentrations of organic contaminants in mussels along the Korean coast were relatively low or moderate compared with foreign studies. Concentrations of DDTs, PCBs, and PCDD/Fs were below the action or maximum levels for humans established by USFDA and EU. Elevated concentrations above the 85th percentile were found for PCBs, PAHs, BTs, and PCDD/Fs at sites near industrial complexes or big harbors, for HCHs at sites near non-industrial complexes, and for DDTs at sites near both non-industrial and industrial complexes. Using two nonparametric tests to assess temporal trends, the Spearman test revealed that BTs and PCDD/Fs had significant decreasing trends at four sites (Gwangyang Bay, Cheonsu Bay, Garorym Bay, and the Incheon coast) and at six sites (Hupo coast, Guryongpo coast, eastern part of Geojedo, Gunsan coast, Garorym Bay, and Asan Bay), respectively.     

Understanding the contributions of anthropogenic and biogenic sources to CO enhancements and outflow observed over North America and the western Atlantic Ocean by TES and MOPITT

We investigate the effects of anthropogenic and biogenic sources on tropospheric CO enhancements and outflow over North America and the Atlantic during July–August 2006, the 3rd warmest summer on record. The analysis is performed using the 3D Regional chEmical trAnsport Model (REAM), satellite data from TES on the Aura satellite, MOPITT on the Terra satellite and surface monitor data from the SEARCH network. The satellite measurements of CO provide insight into the location of regional CO enhancements along with the ability to resolve vertical features. Satellite and surface monitor data are used to compare with REAM, illustrating model's ability to reproduce observed CO concentrations. The REAM model used in this study features CO emissions reduced by 50% from the 1999 EPA NEI and biogenic VOC emissions scaled by EPA-observed isoprene concentrations (20% reduction). The REAM simulations show large variations in surface CO, lower tropospheric CO and column CO, which are also observed by the surface observations and satellite data. Over the US, during July–August 2006, the model estimates monthly CO production from anthropogenic sources (5.3 and 5.1 Tg CO) is generally larger than biogenic sources (4.3 and 3.5 Tg CO). However, the model shows that for very warm days, biogenic sources produce as much CO as anthropogenic sources, a result of increased biogenic production due to warmer temperatures. The satellite data show CO outflow occurs along the East Coast of the US and Canada in July and is more broadly distributed over the Atlantic in August. REAM results show the longitudinally exported CO enhancements from anthropogenic sources (3.3 and 3.9 Tg CO) are larger than biogenic sources (2.8 and 2.7 Tg CO) along the eastern boundary of REAM for July–August 2006. We show that when compared with the impacts of both sources on increasing tropospheric CO exports, the relative impacts in August are greater than in July because of preferable outflow transport.     

Adaptive response criteria in road hazard detection among older drivers

Objectives: The majority of existing investigations on attention, aging, and driving have focused on the negative impacts of age-related declines in attention on hazard detection and driver performance. However, driving skills and behavioral compensation may accommodate for the negative effects that age-related attentional decline places on driving performance. In this study, we examined an important question that had been largely neglected in the literature linking attention, aging, and driving: can top-down factors such as behavioral compensation, specifically adaptive response criteria, accommodate the negative impacts from age-related attention declines on hazard detection during driving?

Methods: In the experiment, we used the Drive Aware Task, a task combining the driving context with well-controlled laboratory procedures measuring attention. We compared younger (n = 16, age 21–30) and older (n = 21, age 65–79) drivers on their attentional processing of hazards in driving scenes, indexed by percentage of correct responses and reaction time of hazard detection, as well as sensitivity and response criteria using signal detection analysis.

Results: Older drivers, in general, were less accurate and slower on the task than younger drivers. However, results from this experiment revealed that older, but not younger, drivers adapted their response criteria when the traffic condition changed in the driving scenes. When there was more traffic in the driving scene, older drivers became more liberal in their responses, meaning that they were more likely to report that a driving hazard was detected.

Conclusions: Older drivers adopt compensatory strategies for hazard detection during driving. Our findings showed that, in the driving context, even at an older age our attentional functions are still adaptive according to environmental conditions. This leads to considerations on potential training methods to promote adaptive strategies that may help older drivers maintain performance in road hazard detection.